Are the digits on your board dim or out? We can replace all of the LEDs and make it as bright as new. We can also repair the circuitry for dead boards or boards that have problems driving the motor.

There is still a lot of older industrial gear in operation that uses CRT monitors. Heidenhain is a prime example. When the CRTs get old and dim the owner has a choice to make. There are LCD replacement kits available but the drawback is that LCDs tend to last about 5 years, which isn't very long in the industrial world. For about the same price as the LCD kit we can put a new CRT tube into your unit and refurbish the circuit board. Yes, we can still get brand new CRTs for most of the common configurations, we'll reuse the old yoke and circuit board and align the new unit just like new.

We've got the parts, schematics and experience to repair these for you.

Part Number 8113903

Our research indicates that these were used in a number of machines from about 2005, they replaced the smaller boards that had the black Crydom modules on them. The part number for item 95 "Motor Control Board" in the parts list changes depending on which revision of manual you have and the publish date leading us to believe that his part superceded 8111879.

The processor and power supply are together in the first module for this model and that makes for an expensive replacement if only the power supply stops working. We can repair the power supply section saving you $$. Our repairs come with a one year warranty.

The Xantrex Freedom Marine is a variation of the Xantrex Freedom 458 or the Heart Interface Freedom Combi. Any shop that can repair one can repair the others. This is a very popular inverter found in boats. One addition to the Marine versions is a built in echo charger. We've repaired lots of these for both charging and inverting faults.

The Xantrex Freedom 458 and the Heart Interface Freedom Combi are essentially the same thing. Any shop that can repair one can repair the other. This is a very popular inverter found in motorhomes and boats, we've repaired a couple dozen or more of these for both charging and inverting faults.

The Xantrex Freedom 458 and the Heart Interface Freedom Combi are essentially the same thing. Any shop that can repair one can repair the other. This is a very popular inverter found in motorhomes and boats, we've repaired a couple of dozen or more of them for both charging and inverting faults.

Working with power supplies for years has exposed us to repeated scenarios of "the main transformer is shorted" or "Solenoid is burned out". Our solution was to buy a manual winding machine and stock the various guages of wire and just re-wind them as needed. If you have a transformer that needs to be replaced we'll disassemble it noting winding numbers and construction details and then we can make you one or many new ones to match.

These are used throughout the telecome industry and beyond, great for warehouse PAs etc.

We've been repairing them for close to 20 years now, we've got the parts, schematics and experience.

We can also repair many other makes and models of paging amplifier.

This module is mounted on the bell cover, it reads the RPM of the generator shaft and will disconnect the starter at about 660 RPM and if the generator goes overspeed it will shutdown around 2190RPM (or for 50HZ operation 1830RPM).